Beste,
Inmiddels ben ik op cursus geweest (dank AlieBengalie) en heb ik wat huiswerk gedaan:
Uiteraard spreekt de loc ook Motorola, naast DCC.
Dit is de decoder die gebruikt is volgens Piko:
http://www.piko-shop.de/index.php?vw_type=artikel&vw_id=863In de manual die je onder het plaatje via de link kan openen staat: (copy & paste>)
Delivery State
On delivery the decoder?s operating mode is set at DCC/Motorola **. It switches automatically between the
two formats. In addition the decoder can be operated with a DC throttle or an AC adapter (Märklin* System) on
conventional two or three conductor layouts.
En op de naastgelegen bladzijde:
Multiprotocol-decoder
Digital Operation on Layouts using either DCC- or Motorola**-Format for Locos with DC-Motors.
Description
It is a powerful, small-outline, multi-protocol-decoder. It can be used in DCC- or Motorola**-systems as well as in
analog DC-mode or AC-operation using the overvoltage pulse for reversal (Märklin*-System).
The decoder employs a chopper frequency of 18,75 kHz and is therefore not only suited for all standard DC-motors,
but also for instrument motors such as Faulhaber, Maxon or Escap, drawing up to 1 amp continuous current. Surges
of short duration are also tolerated.
The speed characteristics are either set by the minimal, intermediate, and maximal speed CVs or by the individual
speed step CVs.
The load compensation parameters can be trimmed to match the individual loco?s properties.
The decoder features two direction-dependent headlight outputs, and two additional ancillary outputs controlled by
F1 and F2.
The function keys F3 und F4 may activate switching mode with an extended slow-speed range, and acceleration/
deceleration. All tasks of output switching and calling up of functions may be freely assigned to any function key
(Function Mapping).
The decoder can be programmed by Intellibox, or any DCC or Märklin*/Motorola** control unit. All CVs can be accessed.
By default, the decoder recognizes DC, AC, or digital operation and adjusts itself automatically. The operation mode
can be manually selected, too.
Properties
? Compensating multiprotocol-decoder for DCC
or Motorola** data format
Wat ik mijn vorige post als intentie had, was aan te geven dat je IR-controller wellicht de beperkende factor is vanwege de beperkte mogelijkheden.
In de hoop dat je het opgelost krijgt!
Groet,